To many who have installed a shower at one time, the problem of the formation of a black plaque that appears along the walls of the booth is familiar. This unpleasant plaque is called a fungus. Often it is formed on sealant, which, at the time of installation, was filled with joints. In order to save yourself from this problem, you will need to take a special sealant that will have protection from the formation of the fungus. For a full -fledged finish of the shower cabin, most often two packages of this tool are enough. After its acquisition, you can proceed directly to the work. Sometimes, in the process of cleaning the fungus in the shower, the phone can fall into the bathroom. And for repair, experts recommend visiting the site
First you should carefully dismantle the doors of the cabin. For the duration of the repair work, you also need to remove all the remaining walls and partitions. To do this, you will have to work a little physically. After your cabin is completely dismantled, you need to carefully get rid of the old sealant on which the fungus was formed. All shower should be cleaned and dried qualitatively. In order for the drying not to drag out for a long time you can apply a simple heater or a hair dryer.
Before you start laying the sealant, you need to check the position of the sink in relation to the floor. These goals are perfect. The adjustment process is carried out using a smooth rotation of the legs in the direction of the clockwise and against, at the same time.
Further the most crucial time comes: the process of applying the sealant. In order for this operation to be more comfortable, it is advised to use a special pistol under a tube with sealants.
In order to put silicone sealant not only tight enough, but also beautifully and aesthetically, immediately after its laying, it is advised to align it, using a small spatula.
