The finishing of the walls can be performed in different ways. The color of the walls due to a number of reasons is becoming increasingly popular.
Advantages and disadvantages
Painting walls with water -based paint has its pros and cons of. The advantages are as follows.
Simple application. Agree, it is much easier and more pleasant to process the walls with a roller moistened in the paint than to paste the wallpaper.
Water -based paint is easily washed off. If you want to update the interior of the room or just change the color of the walls, no problems with it will arise.
If the walls are painted with lighter paint than the new one, then it does not even have to wash it off.
Protective function.
After drying, water -based paint creates a film on the surface, which protects the walls.
Among the shortcomings, one wall can be called for painting should be perfect. If you have a flat wall in your apartment, without cracks and scratches, without potholes and tubercles, then painted, it will look great. But any unevenness, if it is present, will be emphasized by coloring.
Wallpaper, especially thick ones, on the contrary, hide the irregularities and roughness of the walls. As an option, you can consider wall decoration with wallpaper for painting, which combine the advantages of both types of finishes.
Stages of staining
1. Surface preparation
As mentioned above, the surface of the wall for painting should be perfectly even and clean. A primer of walls is necessary to eliminate the spread of mold. For priming the wall for painting, use acrylic synthetic primer, which contains special additives.
Please note that before painting the wall you need to dry thoroughly.
2. Preparation of paint
The instructions for the preparation of paint must be written on the package, you need to strictly follow it. Usually paint is diluted with water, but not more than one tenth of the total number. If you tint the paint, then first try to paint a small section of the wall to evaluate the resulting color. After drying, it will not be the same as in the bank.
Excessively says that the structure of the paint should be homogeneous.
3. Application of paint
Water emulsion paint is applied to several layers with rollers and brushes, which allow you to paint hard areas. The main rule is to evenly distribute the paint over the wall surface. The first layer of paint is made very thin, almost transparent. Before applying the next layer, the previous one must completely dry.
Unceptible places can subsequently tint.
Construction
Watch the video: finishing of wooden surfaces (Rogned).MP4
Watch the video: painting the ceiling with your own hands
