Before proceeding with the arrangement of the porch, you need to leve soil adjacent to the threshold of the house. Then you need to measure the distance from the threshold to the surface of the site. So the height of the structure will be obtained. For the porch, it is necessary to create a base, since you can’t just install the design on the ground.
Under the foundation, you need to dig a pit 50 cm deep. Brick or crushed stone fight on the bottom. Sand 10 cm thick. To tamp the sand well, it should be watered with water. A layer of waterproofing from roofing material is laid on the sand, after which the concrete is poured.
In order for the base to gain strength, it is necessary to wait a few days. Then they start creating the formwork. It is collected from plywood or boards. When arranging formwork, you need to take into account the slope so that the water can flow freely from the porch. To give the formwork of stiffness to the plywood, the strips are nailed and the struts are installed.
So that the solution does not flow out of the formwork, it is necessary to seal the structure. The surface of the formwork is required to smear with a special liquid so that the solution does not stick to the material. Then move on to pouring concrete. The mixture begins to be laid out from the lower tier. To avoid the formation of voids, the solution should be tamped. After hardening the steps, the formwork is dismantled.
For lifting goods, you can use a goat crane. You can buy Kozlova KKS 10 crane from specialists of the company, which is engaged in the supply of cranes and their installation. We bring to the attention of customers that the installation of cranes here is carried out at a professional level at a favorable price.
