To arrange the pool, first you need to choose a suitable place. The pool can be placed where there is vegetation. After the place is chosen, it is necessary to determine the shape of the structure. For the pool bowl, it is better to choose a simple geometric shape. Then the site marking is performed. Next, you need to dig a pit. Its dimensions should be 0.5 m more than the width and depth of the pool. The walls are made with a slope of 3-7 degrees outward so that they do not crumble. So the design will turn out to be more reliable and durable. It is also necessary to equip water drainage. It is desirable that the water goes into the ground. The easiest drain can be made from a metal barrel by breaking through the walls with a chisel. The barrel should be installed below the level of the bottom of the pool and filled with stones. A plastic pipe is placed in it. It needs to be removed to the bottom of the pool and equip the drain hole there.
Then it is required to concrete the site. Previously, a pillow of sand is laid on the bottom. The base is made with a thickness of about 20 cm. Concrete the bottom, it is necessary to provide a slope towards the opening of the drain. It is done in laying at the bottom level, and then closed with a traffic jam. After pouring the bottom, they start laying the wall. The brick needs to be shed into the solution so that the several lower rows are immersed in concrete. For reinforcing rows, metal rods or mesh are used.
Between the wall and the edge of the pit, it is required to leave a distance of 30-35 cm. After the masonry is completed, the outer side of the wall needs to be treated with hot bitumen. When erecting the wall, bricks are laid so that the outer surface is smooth. The inner side is plastered with a cement mortar. You can add liquid glass to the composition. Then the masonry is faced with tiles.