California News - business and investment tipsCalifornia News - business and investment tips
  • News
  • Investment
  • Internet
  • Economy
  • Real estate
  • Travel
  • Society
Reading: Building the pool on the site
Share
Font ResizerAa
California News - business and investment tipsCalifornia News - business and investment tips
Font ResizerAa
Search
  • News
  • Investment
  • Internet
  • Economy
  • Real estate
  • Travel
  • Society
© Job News – All Right Reserved.

Building the pool on the site

December 30, 2024
SHARE

The construction of the pool is better to engage in the construction of a residential building. Previously, it is required to determine the characteristics of the soil, since the basic base cannot be used for such a design. You also need to find out which direction of the wind is the main one in order to place the pool along it.

The upper soil layer should be removed on the site and mark the trenches for the drain system. The depth of the trenches should be 0.6 m. Waterproofing is laid on top. To prepare the base under the bottom, you need to fill a layer of gravel with a thickness of 15 cm. On top you need to pour a layer of sand 10 cm.

Then you need to install the reinforcing system and fill the concrete. You can add aluminum chips to the composition to increase the solution of the solution. Next, you need to install the formwork and pour the upper part. For engineering communications, it is required to make holes by installing pipe segments before pouring.

To arrange formwork, it is recommended to use plywood shields. So the surface will turn out smooth. If the fill is carried out in several stages, you need to try to carry it out with a minimum interval.

If the pool is located in the pool, for them you need to leave the releases of the reinforcement. These parts are poured after the formwork from the sides of the structure is dismantled. Having shot the formwork, you need to check the correspondence of the size of the structure. To align the base, concrete is used, which contains water -repellent additives.

When the concrete is completely dry, you can proceed to the arrangement of the side. To check the bowl, it should be filled with water and follow the level for 5 days. If the level falls, this indicates the presence of leakage. In this case, the water needs to be drained and the cracks in the walls of the bowl. Then the re -check of the bowl is performed.

Where you can buy SIP panels at a very favorable price? SIP panels from eco -Europe are high -quality and are inexpensive. It is worth noting that the company guarantees high -quality delivery of panels to the customer. You can get acquainted with the entire range of panels on the official resource of the seller’s company.

You Might Also Like

Los Angeles flooded by heavy rain after wildfires

About $40 billion will be needed to restore losses after forest fires

Artworks destroyed in California wildfires

How to use a dry mixture to close up seams

How big science rebelled against self -taught

californianewstv December 30, 2024 December 30, 2024
Previous Article Construction of a brick pool
Next Article DIY pool construction

Latest News

California beaches: the best places and their features
February 24, 2025
Entertainment centers in California: the best entertainment ideas
February 24, 2025
In California you can visit a zoo and an aquarium
February 24, 2025
Sunny California is famous for its wine production
February 24, 2025
How Californians relax and the best places to relax
February 24, 2025

Popular

Gypsum plaster Knauf Rotband
News
How to create comfort in the kitchen without special costs
Internet
How to create an archive and store accounting documents
Investment
How to design your own house
Real estate
The best option for interior doors
Investment
© californianewstv.com, 2017-2024. All Right Reserved.
Welcome Back!

Sign in to your account

Lost your password?