To build a pool, you will need to perform a large amount of earthwork. First you need to think over the dimensions of the structure. When arranging the pit, you need to add space from all sides. It is also necessary to think in advance how to use the soil that will accumulate when digging the pit.
After creating the pit, the bottom is poured. Concrete casting must be strengthened with reinforcement, otherwise the pool bowl may crack. To connect the reinforcement, you need a knitting wire. It is not recommended to use welding, since the welded frame will turn out very hard, it can crack when the soil moves.
Then you should build a vertical formwork and pour the walls with concrete. It will take several days to dry the material. It is better to make formwork from iron shields, since less durable material may not withstand the load. After a few days, the formwork should be removed. After that, during the week it is required to moisturize the monolith, since rapid drying is harmful to concrete.
For waterproofing the bowl, special compositions are used. Before use, they are diluted with water. Each layer of waterproofing material must be applied in different directions. When the composition dries, you can proceed to decorating the pool.
If you decide to improve housing and think about the acquisition of real estate, then you may be interested in the new buildings of Minsk, because this city is quite attractive for investing in it. Minsk – a beautiful and clean city with a developed infrastructure.
