When it is planned to have a long serious repair with your own hands, you need to carefully prepare for the entire process and choose not only the necessary building materials, but also divide the repair into several stages and do everything step by step.
Repair begins with the cleaning of surfaces and the room itself from unnecessary trash, the old wallpaper is removed from the walls, from the floor – the flooring. If the work includes a complete replacement of floor and wall covering, then it is recommended to start with the floor. You can proceed to laying the laminate yourself by first putting the ball of the cork lining. This will help to absorb gumm and also preserve the inner ball of laminate from erasure. You also need to choose the appropriate skirting coating. It is better to choose natural materials, so the tree here will be in handy. After working on the floor, you need to give a laminate for several days. If there is tiles on the floor, then it is best to call the tile with experience, since it is not possible to put this material evenly and beautifully.
Work with walls is a little easier if you need to remove old wallpapers and glue new. In this case, you need to get rid of the old coating, then degrease the walls with a primer. After the surface is dry, you can proceed to applying the wallpaper. Each roll must be thoroughly vowed with a clean towel so that air bubbles do not form, and then the sheet does not lag behind the surface of the wall. You need to try to tightly press the wallpaper to the wall so that the glue is well suck. But, with a more complex process, for example, gypsum or putting down, it is also worth using the services of builders. The most difficult type of work is the ceiling. Fixing on your own, bulky structures for suspended ceilings cannot work, you need at least one assistant. As for suspended ceilings, it is also important here that a professional does work. If you need to hypake bumps or smooth out the appearance of the ceiling, change the color, then you can independently start work. First, the old cover of the coating is ripped off, then the primer, then the putty. After the first ball is dry, you need to carefully wipe the entire surface of the ceiling and only then apply the finish ball. Gypsum is used for putty, it allows you to close irregularities and visually level the ceiling.
It is not at all difficult to make repairs with your own hands, if you prepare well for the entire process and take into account all the little things in work.