Today, many owners of not only private houses, but apartments in high -rise buildings, solve the issue of insulation of the walls of their dwellings.
However, before doing this yourself, or to entrust the construction team, you should familiarize yourself with some subtleties of the procedure.
By the way, many useful tips are located on a site specially created to eliminate knowledge gaps on this issue.
So let’s start.
1. Wall insulation should not be carried out at air temperature below +5 ° C.
2. The walls on which a polystyrene foam is attached to be mounted, they should not be wet, otherwise they will never dry out.
3. Damaged plaster on the wall that you intend to heat should be pre -completely knocked down or packed.
4. Before the sticker of mineral wool slabs, they should be covered with their inside with a thin layer of glue.
5. The corners of the house should be properly tied with insulation slabs. That is, each second plate should protrude beyond the edge of the corner on its own thickness and the thickness of the adhesive. Thus, a cross -sectional structure is obtained, which provides increased thermal insulation and reliable fastening.
Subject to these rules, the heating of your house will not bring you losses, but to provide a comfortable temperature-humid regime in the rooms.
