After the construction of the foundation or the basement of the structure, you can proceed to the work on laying the walls. But before that, waterproofing the base should be carried out.
To do this, you can take roofing material and lay in two layers. The protruding part of the basement must be protected by a decorative drain. The process of laying bricks is better to start with its layout without solution. Building materials should be placed, adhering to the preferred type of masonry. Bricks in the upper row should be put so that the seams between the stones in the lower row are blocked. To observe the vertical and horizontal direction of the layered walls, use the plumb line and level. To perform an accurate dressing, builders use a brick cut into half or three quarters. Carrying out the construction of your home, do not forget about work. By the way, how to build a residential building with an underground parking lot can be found on the site. In his yard you will not find a large cluster of road transport.
Building brickwork, they always practice the principle of dressing. It consists in the fact that the stone, which is put in the subsequent row, must certainly lie on the two bricks of the previous row. In this case, the smallest depth is a quarter of a brick. Thanks to this, the load is evenly distributed to the seam.
Today they use several dialing techniques – one -row, three -row and multi -row. With the help of one or another order of construction, a strong and holistic structure can be built. When building masonry, the fastening solution is first applied, and then smoothed to the required thickness.